Enjoy an incredible 5,000 BTU's of warmth that comfortably heats up to 400 sq. ft. from Napoleon's Allure Phantom 42 Electric Fireplace. Enjoy the luxury of a fireplace without the need of specialized installation. Just hang, plug, and enjoy. The matte surround and mesh front provide an entirely unobstructed view of the glass ember bed and multicolored flames, without the glare from a glass front. A touch of a button alternates between a combination of flame colors to set the perfect mood. At only 5" deep, this fireplace won't intrude on your living space, and can be fully recessed. Make a huge impact in any room with the Napoleon Allure Phantom 42 Electric Fireplace.
The Phantom 42 fireplace will be shipped via freight truck. The fireplace will be securely packaged in a wooden crate and inspected before it leaves our facilities. For this type of delivery it is necessary for you or someone you choose to be available at the time and place of the delivery. Read more about how freight shipping works on our FAQ page.
Can this fireplace be recessed into the wall?
Yes, the Phantom 42 can be wall mounted, partially recessed or fully recessed. Check out the excerpts from the installation manual in the images above to see how the Phantom 42 can be installed using the included wall bracket or building it into the wall
What are the electrical requirements?
The Phantom 42 is equipped with a standard plug for any outlet, it requires a 15 AMP, 120 Volt circuit. It is not required, but recommended that the circuit be dedicated, as additional electrical draw from other appliances may trip the breaker. The Phantom 42 can also be hard wired, you can see the hard wiring instructions in the images above.
What's the difference between the Allure and the Allure Phantom?
The difference between the two models is that the Allure has a glass face, which gives it a gloss appearance, while the Allure Phantom has a mesh front, which creates a matte appearance and eliminates the glare from the glass face.
How much does it cost to use the heater?
That depends on your electricity rates. The current average is $0.12/KWH, the Phantom 42 uses 1.5 Kw/H on high, so it will cost around $0.18/Hour to operate.
Can we stone around the unit? The stone is 2.5 inches thick , can the face be flushed with the stone?
Is then face cover detachable and bigger than the unit?
You can stone around the unit, but to be able to remove the front face, you would either need to have a gap at the top to allow the face to be lifted up and then off or you would install the body of the fireplace flush with the stone and then the face would overlap the stone when in place. The latter option allows for the easiest access for removing the face if any maintenance is required. I hope that clarifies everything, if not, feel free to get in touch, (844)635-5499 or email@example.com. Thanks for your question!